Yacht Devices
sailors for sailors
Engine Gateway YDEG-04
Gateway for Volvo Penta, BRP Rotax, SmartCraft (Mercury, Mercruiser) and J1939 engines to NMEA 2000 marine electronics networks. It will provides you with engine revolutions, motor hours, coolant temperature, battery voltage, warning and alarms, fuel rate and other data on the screen of your chart plotter.
The Engine Gateway is compatible with BRP Rotax ( see customer's video with Rotax 1503 4-tec Engines ), Yanmar 4JH series , SmartCraft (Mercury, Mercruiser) , J1939 engines (Caterpillar, etc.) and most Volvo Penta engines manufactured since 2004, and even with some engines manufactured before 2000.
Compatible Volvo Penta engines:
On most vessels with Volvo Penta engines, all that you need is to plug the device into an empty socket of the NMEA 2000 network backbone and connect the engine cable to a Multilink hub or, using the built-in Y-connector on the engine cable of Gateway, to connect it in series with any of the EVC tachometers .
For some engines (please see section IV of manual for details) an adaptor cable is required, and we offer different adaptor cables (see the bottom of this page) for a reasonable price (available in the accessories section of the ordering page).
Factory settings are suitable for most of vessels with one or two engines. In case of two or more engines, one Gateway is enough if they are joined to a single network.
Reasons to buy:
Data you may get on the chart plotter depends on the engine controller and the number of installed sensors. Legacy chart plotters may not support display of all data types.
The Gateway is equipped with a MicroSD card slot intended for firmware updates. In the next firmware versions, we plan to add even more data!
Order ($249 USD) User Manual (PDF)
Order now and get our special offer: free world wide delivery!
The Gateway is supplied with a connector compatible with SeaTalk NG or a connector compatible with NMEA 2000 Micro Male (see the picture below). For other networks, an adaptor cable may be required.
Adaptor cables (available in the accessories section of the ordering page):
For additional technical details, please see the User Guide and FAQ .
View models and prices
Engine Gateways
Deal of the day
- Cables and adaptors
Free 3-days shipping across Canada!
Yacht Devices Canada
NMEA 2000 and NMEA 0183
MARINE ELECTRONICS
All our devices are compatible with a wide range of boat networks built on the NMEA 2000 base, including Raymarine SeaTalk NG, Simrad SimNet, Furuno CAN, and Garmin NMEA 2000. Members of National Marine Electronics Association (NMEA) since 2015.
Best sellers
Find more devices and cables in the full product catalog
Subscribe to our newsletter.
Only important news about new releases and promos
Email: [email protected]
- choosing a selection results in a full page refresh
Yacht Devices produce a range of NMEA 2000 / NMEA0183 / Seatalk NG devices to keep your onboard systems connected and accessible, even via Wi-Fi.
Yacht Devices are compatible with a range of boat networks built on the NMEA 2000 base, including Raymarine SeaTalk NG, Simrad SimNet, Furuno CAN, and Garmin NMEA 2000.
We are experienced with NMEA 2000 networks and devices and will always assist with building a solution for you and your requirements. We can provide detailed connection diagrams and even pre-program devices prior to shipping to ensure a seamless installation.
New Release!
Yacht Devices have just released the new Autopilot controller , the YDAP-04. Working with existing hydraulic or reversible linear drive units, the YDAP-04 can be used in AUTO, TRACK or WIND modes depending on the NMEA2000 data already available on the network. Fully controllable from Raymarine and Simrad (amongst others), as well as button controls at the helm, you will have a fully functional autopilot at a fraction of the cost of a most brand name solutions.
We have devices to allow your legacy electronics to communicate with the latest chart plotter or conversely control an old autopilot, possibly even doing so from your iPad or tablet via Wi-Fi while away from the helm. Do you use Navionics onboard and want to get AIS and GPS information displayed on the app? We have all the equipment and clear instructions to make it work.
We have a range of sensors compatible with NMEA 2000 which could allow you to monitor the temperature of the engine room or freezer all from your chart plotter. Our devices could even listen to your engine and allow you to monitor its vital parameters from your tablet or generate an alarm before its too late.
There are so many options and possibilities with the Yacht Devices range so we encourage you to contact us if you require any selection assistance or have any questions. We are currently adding more products to this website so check back often for the latest.
Yacht Devices Australia is proudly represented by PicoSense . Picosense are also the Australian dealers for Em-trak AIS and the manufacturers of the Marine Internet Kit .
IMAGES