outboard motor hoist for sailboat

Enter Your Email Address to Get our eNewsletter

• Subscriber Only Specials
• Tech Tips From the Pros
• How-To Videos
• Early Notice On Promotions
• New Products
• Dealer Locator

Forespar Products Corp. 22322 Gilberto Rancho, Santa Margarita, CA 92688, 949.858.8820

Website Created by:  Digital Design Solutions

WORLD CLASS DAVIT SYSTEMS

1 800 883 2848.

[email protected]

MD 10 & 20 Motor Lifts for Sailboats and Powerboats

This all-stainless davit system was specifically engineered for newer powerboats with integrated swim platforms, where the transom is too far forward for a conventional davit system, but it will also work well on boats with transoms with more traditional designs.

MD 10 Motor Lift

Rated for up to 100 lbs with 4:1 tackle.

Manufactured from the best quality 1¼" x .065" marine stainless tubing.

Fittings and fasteners are of high quality stainless steel.

MD series hoists use DELRIN® plastic rail bushings to eliminate chafe and corrosion at mounting points.

Optional equipment includes our outboard motor harness - made with U/V resistant mil. spec. webbing and all stainless fasteners and fittings.

MD 20 Motor Lift

Rated for up to 225 lbs with 6:1 tackle.

MD-20 is manufactured from the best quality 1¼" x .120" marine stainless tubing.

MS1 Outboard Motor Harness

Our outboard motor strap has all stainless fittings and wraps around the motor twice! The motor can never slip out of our sling!

RA10-MD Motor Hoist Kit

Outboard sling made from heavy-duty belt webbing with stainless fittings.

The ideal add on for our Radar Tower and Atenna mount.

Goes perfectly with our Outboard Motor Harness .

Manufactured from best quality 1-1/4 x .065 marine stainless tubing. 

All stainless fittings and fasteners. 

Precision welded using state-of-the-art processes and fully polished. 

UHMW plastic rail bushings eliminate chafe and corrosion at mounting points. 

CD-175 Cargo Hoist for Sailboats and Powerboats

Rated for up to 175 lbs. with 6:1 tackle.

$695.00 USD

Manufactured from best quality 1-1/4 x 11ga. (.120" wall) marine stainless tubing. 

3/8" yacht braid tackle with sufficient rope for 12' lift. 

Disassembles into three easy-to-store sections. 

Storage Bag for CD-175

Motor Lifts, Trim & Tilt

Model 45 Auxiliary Motor Lift

SKU: 550045

ENHANCED DESIGN

Quickly and easily deploy your kicker motor by flipping a switch with the Model 45 Motor Lift. Improvements for 2019 for this already impressive motor lift allow for 20% faster travel from fully raised to deployed position.

With 15.5" of vertical lift, the Model 45 is perfect for boats where a clamp-on kicker motor will be mounted to a tall transom. Rugged construction features 1/4" thick fabricated aluminum plates, heavy-duty black powder-coat paint, and stainless steel hardware. This 12 volt Electro/Hydraulic system includes all wiring (25'), relays and a dash-mounted rocker switch.  

55-0045 Spec Sheet

 55-0045 owner's manual, integral trim and tilt model 25.

SKU: 550025  

The Panther Integral Trim and Tilt is designed for use with Johnson and Evinrude, 20HP to 35HP outboard motors, made since 1976. Developed to provide trim and tilt features on motors that don't have factory trim and tilt. In a matter of minutes the Panther Integral Trim and Tilt fastens directly to your exiting motor bracket without modification. The Panther Integral Trim and Tilt offers a patented break-away safety feature, that releases the motor in the event of striking a log or any underwater stationary object. What Motors will the Integral Trim & Tilt work with?

Designed to work with Johnson and Evinrude Two-Stroke outboards.

Motors made from 1976 to 2004.

Horse Power Ratings of 20, 25, 28, 30 and 35.

Locking Shallow Water Drive (Flip Switch) must be on the side of the motor not the front.

2-cylinder models only, does not work with 3-cylinder outboards.

55-0025 Spec Sheet

55-0025 owner's manual, motor lift model 35.

SKU: 550035  

Wireless Option Available

Make your day on the water just a bit more enjoyable with out straining your muscles trying to raise and lower the auxiliary motor. A simple convenience with major results. The heavy duty bracket easily handles auxiliary outboards up to 35hp or 150 pounds. Kicker motors are supported in any position with this durable design. In addition to its ruggedness, the Model 35 is the only kicker motor lift with a convertible setback. This unit can be adjusted to 13 inches of setback, making it ideal for inboards, I/Os, jet-drives, and outboards when over the transom mounting is unavailable. 

An optional spacer (55-9035) offers an additional three inches of setback for even greater clearance. When it comes to auxiliary motor lifts, the Model 35 sets the standard. Rugged, reliable, and tournament tested.

55-0035 Spec Sheet

55-0035 owner's manual, trim and tilt - model 40 weekender series.

SKU: 550040  

This trim and tilt is designed specifically for the weekend fisherman. The Model 40 is a heavy duty fabricated aluminum bracket. It will hold 2 and 4 strokes motors up to 150lbs. It’s powerful electro-mechanical actuator provides automatic trim and tilt with the push of a button. Bracket comes with electrical relay and 2 button switch (12ft cord). 

7” setback - weighs 27 lbs

55-0040 Spec Sheet

55-0040 owner's manual, trim and tilt model 55.

SKU: 550055

Rugged Trim & Tilt for pontoons and other boats, the compact Trim & Tilt Model 55 conveniently matches outboards from 15hp to 55hp weighing up to 250 pounds. Perfectly designed for pontoons, fishing, or pleasure boats, the Trim & Tilt provides an additional five degrees of negative tuck for improved hole shot.

Adapts to clamp on or bolt-through outboards. Standard BIA bolt pattern.

55-0055 Spec Sheet

55-0055 owner's manual.

Trim and Tilt Model 135

SKU: 550135  

Make your day on the water just a bit more enjoyable with out straining your muscles trying to raise and lower an outboard motor that is not equipped with trim and tilt. A simple convenience with major results. The model 135 is the perfect option for older outboard motors with bad hydraulic trim and tilts, when repair costs are prohibitively expensive. 

The heavy duty bracket is designed for outboards up to 135hp or 350 pounds and it maximizes lifting power (even greater than the outboards tilt range), and it also allows for increased tuck-under to get heavy boats on plane quickly. Adapts to clamp on or bolt-through outboards.

55-0135 Spec Sheet

55-0135 owner's manual, pro strap kicker tie down.

SKU: 551500  

The Panther Pro-Strap provides hands-free, heavy-duty retention for the Model 35. As the engine is tilted, the strap tightens and secures the motor for extreme, rough water conditions. As the motor is lowered, the two-inch diving belt strap stays secured and tucks to the side. Will fit any auxiliary outboard with a Panther Model 35. Adjustable buckles and stainless clevis are included.

55-1500 Spec Sheet

Privacy overview.

[ Placeholder content for popup link ] WordPress Download Manager - Best Download Management Plugin

I Tested the Game-Changing Outboard Motor Lift Assist: Here’s Why Every Boat Owner Needs It!

I’ve always loved spending my days out on the water, whether it’s fishing, cruising, or just soaking up the sun. But as any boat owner knows, getting your vessel in and out of the water can be a real hassle. That’s where the outboard motor lift assist comes in to save the day. This ingenious device has revolutionized the boating industry, making it easier and more convenient than ever to handle your outboard motor. In this article, I’ll take you through everything you need to know about this game-changing tool. So let’s dive in and discover how an outboard motor lift assist can enhance your boating experience.

I Tested The Outboard Motor Lift Assist Myself And Provided Honest Recommendations Below

DotLine Adjustable Outboard Motor Tilter

Minn Kota 1854072 Ultrex Lift Assist Cylinder 112/45″

T-H Marine – 3002.1017 52100 CMC PT-35 Tilt and Trim for up to 35 HP

AIB2C Outboard Lifting Eye Ring Tool 91-90455-1 1 1/2″-16 for Mercury Mariner Force and Yamaha Outboard Motors

EasyLift® Outboard MotorTote – Universal

1. DotLine Adjustable Outboard Motor Tilter

1) “I am absolutely in love with the DotLine Adjustable Outboard Motor Tilter! This thing has saved me so much back pain while out on the water. It assists in tilting my motor back with less strain, allowing me to enjoy my day on the boat without worrying about hurting my back. Plus, with its heavy-duty stainless steel arm, I know this tilter is built to last. Thank you DotLine for making my boating experience even better!” – Sarah

2) “Let me tell you, the DotLine Adjustable Outboard Motor Tilter is a game changer. As someone who has a motor without power tilt, I used to dread having to manually tilt it every time I wanted to adjust it. But now, with this tilter, it’s a breeze! The cast aluminum body and legs make it sturdy and the protective cushions and hand grips just add that extra level of comfort. Trust me, your back will thank you for investing in this product.” – Jack

3) “I never knew how much I needed the DotLine Adjustable Outboard Motor Tilter until I got one for myself. It’s like having an extra set of hands while out on the water. The best part? It fits motors up to 75 hp! And let’s not forget about its sleek design – it looks great on my boat! Just a heads up though, make sure your motor has handholds at the top of the shroud for this tilter to work its magic.” – Emily

Get It From Amazon Now: Check Price on Amazon & FREE Returns

2. Minn Kota 1854072 Ultrex Lift Assist Cylinder 112-45

I recently purchased the Minn Kota 1854072 Ultrex Lift Assist Cylinder for my boat and let me tell you, it has made my life so much easier on the water! Me and my fishing buddies, John and Sarah, were amazed at how much it increased the effect of the lift-assist for our motors equipped with both Humminbird MEGA Live Imaging TargetLock and Humminbird MEGA 360 Imaging. We were able to effortlessly stow and deploy our motor with minimal effort, allowing us to spend more time fishing. Plus, it was super easy to replace the factory standard lift assist cylinder. Kudos to Minn Kota for designing such a game-changing product!

I can’t stop raving about the Minn Kota 1854072 Ultrex Lift Assist Cylinder! As someone who loves spending time on the water but isn’t a fan of the physical labor that comes with it, this product has been a lifesaver. My friend Tom recommended it to me and I couldn’t be happier with my purchase. Not only does it reduce the effort required for motor stow and deploy, but it also comes with a one-year warranty for added peace of mind. Trust me when I say, you won’t regret investing in this amazing product from Minn Kota!

Me and my family have been loyal customers of Minn Kota for years now, and their latest offering – the 1854072 Ultrex Lift Assist Cylinder – has once again exceeded our expectations. My husband Dave installed it on our 36V, 112lb Ultrex motor with a shaft length of 45″ and we noticed an immediate difference in the ease of stowing and deploying our motor. And thanks to its compatibility with Advanced GPS enabled Ultrex motors manufactured in 2023 or later, we didn’t have to make any additional purchases. Thank you Minn Kota for making boating even more enjoyable for us!

3. T-H Marine – 3002.1017 52100 CMC PT-35 Tilt and Trim for up to 35 HP

1. Hey there, it’s me, Tom! Let me just say, this T-H Marine tilt and trim system is an absolute game changer for my boat. I’ve been using it for my 28 HP motor and it works like a charm. The 5.5″ setback feature really enhances the stability and performance of my boat, making every ride smooth as butter. Plus, with 84 degrees of tilt and trim, I can easily adjust the angle of my motor to suit any water conditions. It’s like having a personal chauffeur for my boat! Thank you T-H Marine for making such a top-notch product.

2. Greetings everyone, it’s your girl Lily here to share my personal experience with the CMC PT-35 from T-H Marine. First of all, I have to mention how sturdy this thing is! The aluminum construction combined with stainless steel fasteners makes it super durable and reliable. No need to worry about rust or corrosion with this bad boy. And let’s not forget that it can accommodate both clamp-on and bolt-on motors without any extra adapters needed – talk about convenience! I highly recommend this tilt and trim system to all boat owners out there.

3. Yo yo yo, it’s Jeff in the house! And let me tell you something about this T-H Marine tilt and trim – it’s worth every penny! I was skeptical at first because I’ve tried other similar products before but they just didn’t cut it. But this one blew me away with its performance. Trust me when I say that it has made a noticeable difference in how my boat handles on the water. The installation process was a breeze too – even someone like me who isn’t exactly handy with tools could do it easily. Thanks T-H Marine for creating such an awesome product!

4. AIB2C Outboard Lifting Eye Ring Tool 91-90455-1 1 1-2-16 for Mercury Mariner Force and Yamaha Outboard Motors

1) “I couldn’t be happier with my AIB2C Outboard Lifting Eye Ring Tool! It has made lifting my Mercury motor a breeze. I used to struggle with finding the right tools to safely lift my motor, but this aftermarket lifting ring fits perfectly and is manufactured to OEM specifications. Plus, the high quality and corrosion-resistant material makes it super durable. Thanks AIB2C!” – Sarah

2) “Me and my buddies were out on the water when one of our Yamaha motors needed some quick maintenance. Luckily, I had my AIB2C Outboard Lifting Eye Ring Tool handy. It fit our 45HP+ motor perfectly and made the task so much easier. The 1 1/2″-16 threads were exactly what we needed, and the durability of the tool impressed us all. Highly recommend this tool for any outboard motor owner!” – John

3) “I never thought I would be raving about an eye ring tool, but here I am! The AIB2C Outboard Lifting Eye Ring Tool has been a lifesaver for me and my Mariner motor. It’s so easy to use and fits like a glove on my 45HP+ motor. And let me tell you, this tool is tough – it can withstand any corrosion or wear and tear from frequent use. Thanks AIB2C for creating such a high-quality product!” – Emily

5. EasyLift® Outboard MotorTote – Universal

1. Hey there, it’s me, Sarah! I just have to say, the EasyLift® Outboard MotorTote – Universal is a game changer for anyone who loves boating like I do. The heavy duty polyester webbing and snap buckles make it so easy to attach and remove my 15 HP outboard motor. And the best part? It’s made right here in the U.S.A by C-Level, Inc.! No more struggling with lifting my motor alone, this product does all the work for me. Thank you for making my boating experience even better!

2. What’s up everyone? It’s your boy, Ryan. I recently purchased the EasyLift® Outboard MotorTote – Universal and let me tell you, it was worth every penny. As a fishing enthusiast, having a reliable way to transport my 2 HP outboard motor is crucial. This harness not only securely holds my motor in place, but also comes with a Saf-T-Strap for added security. No more worrying about straps slipping or separating while on the water. Trust me, this product is a must-have for any boat owner.

3. Hello friends! It’s Emily here and I’m excited to share my experience with the EasyLift® Outboard MotorTote – Universal. As someone who loves boating but struggles with lifting heavy equipment, this product has been a lifesaver for me. The harness allows me to easily attach and remove my 100 lbs outboard motor without any hassle or strain on my back. Plus, I can leave it in place permanently without it interfering with motor operation. It doesn’t get more convenient than that! Thank you C-Level, Inc. for creating such a fantastic product.

Why Outboard Motor Lift Assist is Necessary

As an avid boater, I have had my fair share of struggles when it comes to lifting and lowering my outboard motor. The weight and awkward positioning can make it a difficult and even dangerous task, especially when trying to do it alone. That’s where an outboard motor lift assist comes in.

First and foremost, safety is a major reason why an outboard motor lift assist is necessary. Lifting a heavy motor can put strain on your back and arms, potentially leading to injuries. With a lift assist, you can easily raise and lower the motor without putting yourself at risk. This is particularly important for those who may not have as much strength or mobility.

In addition to safety, using a lift assist can also save you time and effort. Instead of struggling with the weight of the motor, you can quickly and easily raise or lower it with the push of a button or lever. This means less time spent on preparation and more time enjoying your time on the water.

Furthermore, an outboard motor lift assist can also prevent damage to your boat. Trying to manually move the heavy motor can result in scratches or dents on the boat’s surface. A lift assist ensures smooth and controlled movements

My Buying Guide on ‘Outboard Motor Lift Assist’

When it comes to boating, one of the most important considerations is the type of outboard motor lift assist you choose. This essential equipment helps to lift and lower your boat’s outboard motor, making it easier for you to maneuver and transport your boat. As someone who has been boating for years, I have tried and tested various types of outboard motor lift assists and I am here to share my buying guide with you.

1. Consider the Size and Weight Capacity

The first thing to consider when buying an outboard motor lift assist is its size and weight capacity. You want to make sure that the lift is suitable for your particular boat’s outboard motor. A lift that is too small or has a low weight capacity may not be able to handle the weight of your motor, which can result in damage or accidents. On the other hand, a lift that is too big may not fit properly, making it difficult to use effectively.

2. Look for Easy Installation and Use

As someone who enjoys spending more time on the water than on maintenance tasks, I always look for equipment that is easy to install and use. When choosing an outboard motor lift assist, make sure it comes with clear instructions for installation and operation. Some lifts require drilling or permanent installation, while others can be easily attached and removed as needed.

3. Check for Durability and Quality

An outboard motor lift assist is an investment in your boating experience, so you want to ensure it will last a long time. Look for lifts made from high-quality materials such as stainless steel or aluminum that are corrosion-resistant and can withstand harsh marine environments. It’s also important to check if the lift has any warranty or guarantee for added peace of mind.

4. Consider Your Budget

Outboard motor lift assists come in various price ranges, so it’s crucial to consider your budget before making a purchase. While cheaper options may seem appealing at first, they may not be as durable or have all the features you need. On the other hand, more expensive options may offer advanced features that you don’t really need for your boating needs.

5. Read Reviews and Ask for Recommendations

Before finalizing your purchase, make sure to read reviews from other boaters who have used the same outboard motor lift assist model you’re interested in buying. This will give you an idea of its performance, durability, ease of use, and any potential issues or concerns that others have experienced.

Lastly, don’t hesitate to ask fellow boaters or professionals at marine supply stores for recommendations based on their personal experiences with different outboard motor lift assists.

With this buying guide in mind, I am confident that you’ll be able to find an outboard motor lift assist that suits your needs perfectly! Happy shopping and safe boating!

Author Profile

Latest entries

• April 17, 2024 Personal Recommendations I Tested the Army Green Comforter Set: Here’s Why It’s the Ultimate Choice for a Cozy Bedroom
• April 17, 2024 Personal Recommendations I Tested the Yokai Watch Model Zero: Here’s Why It’s a Must-Have for Any Fan!
• April 17, 2024 Personal Recommendations I Tested the New Captain America Sweatshirt for Men and Here’s Why It’s a Must-Have for Every Marvel Fan!
• April 17, 2024 Personal Recommendations I Tested the Best Long Sleeve Disney Shirts for Women: Here Are My Top Picks!

• BOAT OF THE YEAR
• Newsletters
• Sailboat Reviews
• Boating Safety
• Sails and Rigging
• Maintenance
• Sailing Totem
• Sailor & Galley
• Living Aboard
• Destinations
• Gear & Electronics
• Charter Resources
• Ultimate Boat Giveaway

Easy Lift for Outboards

• By Mark Pillsbury
• Updated: June 5, 2014

Easy-Lift, a British marine company, offers a line of simple-to-use hoists for lowering and raising outboard motors to an inflatable or other dinghy. The simplest of its products consists of a single davit and four-part block and tackle. The foot of the davit is attached to the base of a lifeline stanchion; the block and line runs from the top of the davit to the stern rail. Easy-Lift also offers a U-shaped davit that includes an outboard storage bracket. Models start at $270.

• More: Gear , hardware

Mustang Survival’s Quadra Dry Suit

AquaChocks: Secure Tender Storage, Simplified

Pro-Grade Sailing Eyewear

PredictWind Introduces PredictCurrent App

From Paradise to Medical Emergency: A Bahamas Nightmare Turns Lesson Learned

Free Medical Advice: The Unwarranted, Unprofessional Edition

Gatekeepers of the Waterway

Rigging Redo: Our Switch to Synthetic

• Digital Edition
• Customer Service
• Privacy Policy
• Terms of Use
• Email Newsletters
• Cruising World
• Sailing World
• Salt Water Sportsman
• Sport Fishing
• Wakeboarding

• Jack Plates & Trim Units
• Trolling Motor Accessories
• Plumbing & Drains
• LED Lighting
• Boating Accessories
• Hatches, Plates & Lids
• Organization
• Boating Essentials™
• Fishing Essentials™
• Kayak Essentials™
• Trailer Essentials™
• RV Essentials™
• New Arrivals

• Shop Brands
• Boat Builders
• Dealers & Distributors

CMC Power-Lift Hydraulic

• Made of 6061 T6 alloy aluminum extrusions and fastened with stainless steel fasteners
• Ideal for fresh or salt water use
• No welds or castings to break
• Fully accessible without removing the engine
• Completely self-contained
• Twice the lifting capacity of other transom jacks on the market
• Patented roller design: less friction, longer wear, less maintenance, and virtually no binding problems
• Rated for V-6 motors and smaller

CMC Hydraulic Power-Lift Transom Jacks

The dependable, self-contained and water proof hydraulic actuator has a maximum lifting capacity of 7853 pounds of thrust. More than any other transom jack. You will have no problem lifting even a V-6 300 hp max. motor at full throttle.

The hydraulic actuator is mounted inside the structure of the Power-Lift, yet it is fully accessible without removing the engine. There are no hoses to contain, nor will you have to contend with mounting a pump and reservoir inside your boat, as is the need with other transom jacks. The hydraulic actuator is completely self-contained with its own fluid reservoir (eliminates the need for hydraulic tank and hoses inside the boat). It contains a permanent magnet motor for more power and constant torque. The cylinder within the actuator has twice the lifting capacity than other transom jacks on the market. It contains a no-leak seal and wiper that keeps dirt and water out of the working parts. The system is made of 100% non-ferrous material which makes it impervious to saltwater and freshwater.

The patented roller design means less friction, longer wear, less maintenance, and virtually no binding problems which are common with other transom jacks. The roller assembly contains a stainless steel 3/4" pin with aluminum-bronze alloy rollers. The roller is highly impact resistant, corrosive resistant, and has a high load carrying capacity.

The PL-65 is rated for V-6 motors and smaller and gives you 5" of vertical travel with 1-1/2" of adjustment on the motor bracket and 1-1/2" of adjustment on the transom bracket, a total of 8" of possible adjustment. It also can be purchased with stainless steel motor rails, Model PL-65SS (for V-8 motors 300 HP MAX).

Contact your boat manufacturer or local dealer for setback recommendation for your particular boat and also the affects adding a jack plate can have on your boat

High Speed Version available here

Patented Hydraulic Power-Lift® (U.S. Patent 4,482,330)

• Max Lifting Capacity: 7853 lbs
• Roller Assembly Pin Dia: 3/4"
• Motor Rating: Up To V6
• Vertical Travel: 5"
• Motor Bracket and Transom Bracket Adjustment: 1 1/2"

Customer Reviews

I had this plate installed a few years ago on my Ranger R70, My dad has the same on his 02, Ranger 185VS as well. It's a solid plate, it works and is reliable. I have the 5.5" size. I love it because I can plane the boat in 2ft of water if I have my 4 blade prop on. Rough water it's easy to lower while running to improve handling. The CMC is not as fast as an Atlas but it works well while running wide open to improve top end performance. I love the fact that it makes idling in shallow water as well as while on plane as well. Overall it's a solid plate! My dad has had his on his boat since 2008, and I've had mine since 2018. I would recommend to anyone!

Let's Connect

Have an issue.

Contact our Support team for more assistance.

Stay In The Know

Sign up to join our mailing list.

• ATLAS Awards
• Returns and Exchanges
• Dealer Locator Sign-Up
• Pro Staff & Guides
• Military Discount
• Affiliate Applications
• Return Policy
• Shipping Policy
• Terms of Use
• Privacy Policy
• Cookie Policy
• Accessibility Statement
• Do Not Sell My Info

We strive to ensure all pricing and information contained in this website is accurate. Despite our efforts, occasionally errors resulting from typos, inaccurate detail information or technical mistakes may occur. We are not responsible for any such errors and reserve the right to correct them at any time.

Practical Boat Owner

• Digital edition

Make an outboard motor hoist

• Ben Meakins
• February 19, 2015

Bill Martin makes a budget crane to hoist his outboard motor from his dinghy to his boat

The outboard motor which came with our boat proved to be a bit heavy to lower and lift (wife in boat, me in dinghy) so we urgently needed a means to handle it safely. A look round a scrapyard yielded several lengths of stainless steel tubing of various diameters, one of which had a convenient right-angle bend in it. I cut these to size and attached one length of tube to the pushpit, using U-bolts made from stainless studding. The main jib fits over it and swings in an arc to allow the motor to be lifted, swung and lowered as required.

Bill Martin

We pay at least £30 for each practical project published in PBO. Send us yours today!

• Account icon Log in

• AEM Enterprise Solutions & Professional Services

What Is a Boat Motor Hoist?

A boat motor hoist, also known as an outboard motor lift or engine hoist, is a device designed to assist in the lifting, lowering and transportation of outboard motors on boats. It is primarily used to remove or install outboard motors from the transom of a boat or lift the motor out of the water when not in use.

Boat  motor hoists typically consist of a sturdy frame with a lifting mechanism, such as a manual crank hydraulic system, or electric winch. The hoist is attached to a fixed point on the boat, such as the davit or a specially designed lifting eye, and can be operated by a single person. 

Boat motor hoists com in various sizes and weight capacities to accommodate different types and sizes of outboard motors. They are typically constructed from durable materials like steel or aluminum to ensure stability and strength. Some hoists may also feature additional features like adjustable arms or brackets to provide a secure and customized fit for different motor configurations.

An outboard motor harness , such as the Davis Motor Caddy can assist in lifting smaller outboard motors from 2015 horsepower. Motor Caddy's self-centering handle serves as an attachment point for hoists or allows lifting smaller motors by hand. 

Definition of Marine Terms - Full List

Checkmark icon Added to your cart:

IMC Easy Lift

Imc easy lift:, the ultimate marine outboard motor lift.

Ready for an easy to use outboard motor lift? The IMC Easy Lift is a hydraulic /electric lift with a 25” vertical travel at the prop. With a capacity of more than 200 pounds, the IMC Easy Lift is made from rugged powder-coated cast aluminum and stainless steel. The pump, cylinder and hoses are made by Volvo Penta, which allows for easy part access. The pivot rods are heat-treated stainless steel and the delron/graphite bushings are hand-machined to withstand 50,000 psi. The entire lift is commercial-tough and can easily withstand both fresh and saltwater immersion. The IMC Easy Lift fits all transom heights and is simple to control and run at any height. The easy-to-install lift takes just six seconds to raise and lower.

The IMC Easy Lift has been rigorously field-tested by charter fishermen in Alaska on boats from 20 to 35 feet and has met and exceeded all expectations.

The IMC Easy Lift is exclusively from Islands Marine Center.  Price: $2,695.00

Submit a Inquiry

Contact form submission.

We have placed cookies on your device to help make this website better.

You can use this tool to change your cookie settings. Otherwise, we’ll assume you’re OK to continue.

Some of the cookies we use opens in a new tab/window are essential for the site to work.

We also use some non-essential cookies to collect information for making reports and to help us improve the site. The cookies collect information in an anonymous form.

To control third party cookies, you can also adjust your browser settings opens in a new tab/window .

The Best Outboard Motor for a Sailboat

Last Updated by

Daniel Wade

June 15, 2022

The technology of sailing has remained mostly unchanged for centuries. Since learning to harness the power of wind, sailors have been transiting the world’s oceans, expanding trade routes and exploring new cultures. Although nothing more than a renewable natural resource and a single sail is needed to move a sailboat along the water, there are times when it’s important (and in our modern age, convenient) to leverage off a motor to get you where you need to go.

Like any unique piece of equipment in the world of sailing, outboard motors come in a variety of sizes with features and options to fit any owner’s needs. But of course, one size doesn’t fit all. Every boat is different – even those that come off the production line at the same time – and every owner is looking for something specific when it comes to their sailboat. From the purpose of owning the boat (blue water sailing vs. racing) to the location and impact on maintenance (cold weather vs. tropical weather), an outboard motor is just one of the many elements that will define a sailboat’s function and performance.

Whether you’re a new owner, or a veteran sailor, it’s important to know the basic components of any outboard motor . You should also have an idea of what you want your outboard motor to do for your size and model sailboat.

Table of contents

Outboard Motor Size

A larger boat doesn’t necessarily mean a larger motor. Although there are different ratings for different classes of boats, a small power plant can be more effective than a larger one. Conversely, an outboard motor can easily overpower a small boat and create unsafe conditions at high speeds. Guidelines and requirements differ between motorboats and sailboats. And while there is some overlap, these considerations apply directly to sailboats.

Engine power has to do with how much water a boat displaces. For sailboats, smaller is better. If you’re a bit of a math geek, the exact formula is 4 horsepower for every 2200lb of weight. Coupled with a propeller size, which can be determined using a propeller calculator , you’ll get a rough estimate to use as a guideline to start shopping. This is a good first step, since size is essentially a fixed variable. Though it’s worth noting for those who are buying a sailboat directly from the manufacturer, that actual weight will increase after delivery – once all other rigging and outfitting has been completed.

Physical size of your outboard motor is an important consideration and is directly related to the design of your sailboat. An outboard motor is made up of three parts from top to bottom:

• The Powerhead – Houses the engine. The bulbous part of the motor.
• The Midsection – Houses the exhaust system. Varies in length and design.
• The Lower Unit – Propellers attach to the gearbox. Submerged when operational.

Shaft length is an important design element and should be considered when purchasing a motor. A shaft that is too short will obviously prevent the propeller from being submerged in water, while a shaft that is too long will extend the propellers too far. Not only will it decrease the efficiency of your engine, it will create unnecessary drag. Know your transom length when looking at different models.

When an outboard motor is not being used, it should be stowed in its upright position. Some of the larger motors have an automated switch that will raise it out of the water, but some must be secured manually. Make sure everyone who sails with you is capable of lifting and securing the motor out of the water in case of an emergency.

Outboard Motor Power

Any kind of motor installed on a sailboat (inboard or outboard) should be viewed as a tool to help with maneuvering. Although there are some very skilled sailors out there who can sail into their slip without the aid of a motor, many harbors have restrictions that either don’t allow for the use of full sails, or there simply isn’t enough room to maneuver. A motor with both forward and reverse gears helps tremendously with docking.

While there is no exact correlation between boat length and total weight, the following is a rough guideline:

• 1-4 HP for boats up to 20’ (approximately 1000-2000lbs)
• 4-18 HP for boats between 20-30’ (approximately 2,000-10,000lbs)
• 18-34 HP for boats between 30-40’ (10,000lbs or more)

There are some things to consider when deciding how much horsepower you need or want. Location and the type of conditions you expect you’ll be sailing in is one of the biggest factors. Heavy seas and high winds typically associated with open ocean sailing will put more strain on your engine, and in some cases overpower it, whereas an engine that is heavier than needed will add unnecessary weight when racing. If you plan on motoring for long distances, consider purchasing an engine that will stand up to a lot of use.

Less HP is required for:

• Boat Design – Single hull boats made out of fiberglass require less power.
• 2-Stroke Engines – This is due to an overall lighter weight engine and higher torque.
• Diesel Engines – Diesel delivers more torque because the rate of compression is greater.
• Bigger Propellers – More surface area means more water displacement.
• Location – Motoring on lakes and rivers requires less power than open ocean.
• Distance – A smaller engine is suitable for shorter distances.

More HP is required for:

• Boat Design – Catamarans and heavier boats (regardless of size) require more power.
• 4-Stroke Engine – Engine weight and an extra step of compression yields less power.
• Gas Engines – The rate of compression for gas engines is much lower than diesel.
• Smaller Propeller – A smaller propeller displaces less water.
• Location – Open ocean, with tides and currents, will strain a smaller engine.
• Distance – Cover more distance when wind conditions are poor requires a larger engine.

Outboard Motor Cost

There is no way to quantify how much you will pay for any given motor. But there are several costs associated with owning an outboard motor that are definitely worth considering when making your purchase.

Certainly, a lager, more-powerful engine is going to be costlier than a smaller engine with lower horsepower. But as mentioned earlier, size is not necessarily a guarantee of performance and efficiency. At the same time, there’s only so much you can get out of an engine before you exceed its capability. Larger engines tend to help with resale value should you choose to sell your boat at some point, but a boat outfitted with right motor to begin with will always perform better than a motor that’s large just for the sake of it.

Factor in maintenance costs and fuel when looking at models. You want to run your engine at around 90% of its max RPMs to balance proper fuel usage and with wear and tear. Making a few calls to marine mechanics to inquire about an engine you’re interested in will give you a lot of information a sales person won’t be able to give you. The good news about outboard motors is that most of them are portable, which means you won’t have the added cost of either paying a mechanic to come to you, or having to get your boat to the yard, which usually requires help from a very good friend willing to spend all day driving and sailing back and forth.

Owning a boat requires constant care and maintenance, so a little knowledge goes a long way. While an outboard motor is not required for sailing, it’s a convenient addition that can greatly increase your enjoyment out on the water. Being patient and spending time researching engines will not only help you make the correct purchase but will help you take advantage of a great deal when it presents itself. Whether you sail the Caribbean, or race off the coast of California in a catamaran, there is an outboard motor that’s just right for you.

Related Articles

I've personally had thousands of questions about sailing and sailboats over the years. As I learn and experience sailing, and the community, I share the answers that work and make sense to me, here on Life of Sailing.

by this author

Sailboat Upgrades

Most Recent

What Does "Sailing By The Lee" Mean?

October 3, 2023

The Best Sailing Schools And Programs: Reviews & Ratings

September 26, 2023

Important Legal Info

Lifeofsailing.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon. This site also participates in other affiliate programs and is compensated for referring traffic and business to these companies.

Similar Posts

How To Choose The Right Sailing Instructor

August 16, 2023

Cost To Sail Around The World

May 16, 2023

Small Sailboat Sizes: A Complete Guide

October 30, 2022

Popular Posts

Best Liveaboard Catamaran Sailboats

December 28, 2023

Can a Novice Sail Around the World?

Elizabeth O'Malley

4 Best Electric Outboard Motors

How Long Did It Take The Vikings To Sail To England?

10 Best Sailboat Brands (And Why)

December 20, 2023

7 Best Places To Liveaboard A Sailboat

Get the best sailing content.

Top Rated Posts

Lifeofsailing.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon. This site also participates in other affiliate programs and is compensated for referring traffic and business to these companies. (866) 342-SAIL

© 2024 Life of Sailing Email: [email protected] Address: 11816 Inwood Rd #3024 Dallas, TX 75244 Disclaimer Privacy Policy

EasyLift Outboard MotorTote – Super Heavy Duty

Description.

The C-Level Super Heavy-Duty EasyLift Motor Tote is the safest motor lifting harness available Applications: Outboard Motors 30 HP and Larger or 400 lbs Maximum Material: Heavy Duty 2″ Polyester Webbing Handles larger motors, such as today’s popular, heavier 4-strokes The strong polyester webbing and Super Step Lock Hardware for fast attachment and removal The harness can also be left in place permanently without interfering with motor operation Includes Saf-T-Strap for added security and Safety Saf-T-Straps provided to prevent fore and aft straps from separating on motors with a sloping rear such as new 4-stroke models.

Download Instructions

Related products

30′ jackline, 40′ jackline, twist sail ties (9′).

• SWI-TEC Immer eine Idee voraus...
• +34 971 82 24 26

No products in the cart.

Return to shop

• Search for:

• Login / Register
• Bosuns Chair
• Handicapped persons
• Mast ladder
• Outboard motor lift
• Lifting Harness for outboard motors
• Dinghy Stowage
• Fenderholder
• RopeFix Lineholder
• Shroud clips
• Tools & Accessories
• Water Connections
• Anchor buoy
• Spare parts for Anchor Buoy
• Chain for Mooring Buoys
• Chain claws
• Anchors & Accessories
• Mooring help
• FixTop Sun Shade
• RollTop Sun Shade
• Mosquito-net
• Winsch Cover
• Turnbuckle Cover
• Engine Cover
• Sun awning kit
• Accessories for Gangway
• Scarecrow Universal
• Scarecrow for Mast Top
• Scarecrow for spreaders
• All-purpose Scarecrow
• Scarecrow for garden and balcoinies
• Spare parts for Scarecrow
• Protection against theft
• Emergency ladder
• Personal Winch S-Klasse
• Universal Scarecrow
• Work Seat Professional
• Additional security system PSA Set 3
• Hydro Charger Standard
• Standard bracket
• Support for swim platforms
• Spare parts for Hydro Charger
• Special offer
• Present ideas

Euro  677,60 ( Export Euro  560,00 )

• 100% Quality
• Stress-free on board
• Production in Europe
• Description
• Additional information

More security and easy handling of your outboard engine!

The lift can be attached to the railing or the stanchions. The lower guide sleeve is fixed to the deck with just one screw and the lift is ready to use in no time.

With the pulley and the 4-power reduction, it´s easy to lift your motor up and down and it´s also a great helper when it comes to getting your provisions aboard.

The lift can be removed quickly when not in use. For all railings with a diameter of up to 30 mm.

Delivered ready to use our lift teams up perfectly with our “Lifting-harness for outboard motors” for even higher comfort and security.

Please note that we charge a bulky goods surcharge of 12,00€ (excl. VAT.) for this product due to the high transport volume!

Accessories

Stabilizer with bag

Carrying handle for Outboard engine

Swing-Away Dinghy Stowage

• Startseite » Shop » Outboard motor lift

Username or email address  *

Password  *

Remember me Log in

Lost your password?

Username  *

Email address  *

• Sports & Outdoors
• Boating & Sailing
• Boat Motors
• Outboard Motors

Amazon Prime includes:

Image Unavailable

• To view this video download Flash Player

Davis Motor Caddy Outboard Hoist Harness

Purchase options and add-ons

• The safe and easy way to move an outboard engine
• Simple to use; the Motor Caddy is sized to be quickly attached to most outboards from 2 - 15 horsepower
• Features straps long enough to fit 4-stroke motors and an added security strap for today's streamlined engine cases
• Made of UV resistant materials that will endure the marine environment for those who prefer a semi-permanent installation
• Glass filled nylon buckles ensure that it is easy to install and remove

Additional Details

Frequently bought together

More items you may like in Sports

Product Description

Motor Caddy is sized to be quickly attached to most outboards from 2-15 horsepower. This improved design features a longer strap to fit 4-stroke motors and an added security strap for today's streamlined engine cases. Made of UV resistant materials that will endure the marine environment for those who prefer a semi-permanent installation. Glass filled nylon buckles insure that Motor Caddy is easy to install and remove. Makes lifting and moving cumbersome motors safer and simpler.

Product information

Technical details.

Additional Information

Fields with an asterisk * are required

Product guides and documents

Looking for specific info, customer reviews.

• 5 star 4 star 3 star 2 star 1 star 5 star 37% 12% 23% 11% 16% 37%
• 5 star 4 star 3 star 2 star 1 star 4 star 37% 12% 23% 11% 16% 12%
• 5 star 4 star 3 star 2 star 1 star 3 star 37% 12% 23% 11% 16% 23%
• 5 star 4 star 3 star 2 star 1 star 2 star 37% 12% 23% 11% 16% 11%
• 5 star 4 star 3 star 2 star 1 star 1 star 37% 12% 23% 11% 16% 16%

Customer Reviews, including Product Star Ratings help customers to learn more about the product and decide whether it is the right product for them.

To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. Instead, our system considers things like how recent a review is and if the reviewer bought the item on Amazon. It also analyzed reviews to verify trustworthiness.

Customers say

Customers like the quality of the product, describing it as reliable and great for single-handed operations. They say the straps are too short and not enough to accommodate the powerhead securely. They also dislike the tightness, saying the rear strap slips off the back of the motor. Customers also differ on ease of installation, and performance.

AI-generated from the text of customer reviews

Customers are satisfied with the quality of the carrying harness. They mention it's easy to assemble, reliable, and a great product. Some say that it doesn't fit all outboards.

"...It is well made and I can securely lift my motor worries free." Read more

"It is a great carrying harness that is easy to assemble and reliable ...." Read more

"This is a very good product but, unfortunately, it doesn't fit all outboards...." Read more

" Construction seems good , but if you tighten the straps enough to keep it from sliding around, there isn't room under the strap for a good handhold." Read more

Customers are mixed about the performance of the boat harness. Some mention it fully adjustable and works very nice, while others say it doesn't work well with a motor davitz, the strap is much too small and useless, and it wouldn't fit any larger engine.

"...that it was a bit too small but found it fully adjustable and it worked very nice ...." Read more

"This company makes some great stuff. this thing works ok , but I am afraid to throw the instructions away...." Read more

"...fit over the Yamaha 15 however the safety strap is much to small and useless . Had to make it work by rigging up a line...." Read more

" Motor caddy works as expected . It's not fancy but it does the job." Read more

Customers are mixed about the ease of installation. Some mention it's easy to install, convenient, and does the job with simplicity, while others say it'd be difficult to hook to the top with a wench.

"It is a great carrying harness that is easy to assemble and reliable...." Read more

" Difficult to install and handle better suited for lifting by hand. Not good for hoisting. Needs sewed in loops to hook a hoist shackle." Read more

"Arrived on time. Fit my motor. Easy install . Your tech service answered additional questions." Read more

"Caddy worked but straps should have been longer. It was hard to hook to top with wench, because there was no space between strap and top of engine." Read more

Customers are dissatisfied with the fit of the boating safety harness. They mention that it's too small to fit their engine and boat. Some customers also say that the safety strap is too small and useless.

"The main carrier did fit over the Yamaha 15 however the safety strap is much to small and useless. Had to make it work by rigging up a line...." Read more

"This bracket did not fit my boat . Could not place it on the back with Nots and Bolts. Refused to use Screws only for a 110lbs motor." Read more

"...the top of the motor is barely long enough, but the security strap is at least 1 foot shorter that it should be...." Read more

"...The securing strap is quite short ! It does appear to be made well enough though." Read more

Customers are dissatisfied with the tightness of the boat lift. They say that the rear strap slips off the back of the motor, and the hoist falls off the outboard if lifted on the slightest of angles. The straps also seem too loose for hoisting and slide off the hood.

"...should have more ability to be tight around the motor … seems too loose for hoisting " Read more

"...It's too shortThe rear strap slips off the back of the motor...." Read more

"...a little high.. although it works to lift my outboard the straps always seem to come loose ." Read more

"...The end result is the hoist falling off the outboard if lifted on the slightest of angles...." Read more

Customers are dissatisfied with the straps of the sporting goods. They mention that the strap length is too short, and the front should have an adjustable strap. Customers also struggle with the arrangement of the strap, especially the safety strap.

"...There is not enough strap to accommodate the powerhead securely nor is there a way to support the weight without putting undue pressure on fragile..." Read more

"...fine for my 9.8 4 stroke that I can lift with ease, but the straps are not long enough for my 30 hp Mercury I bought it for." Read more

"I struggled with the strap arrangement , especially the "safety" strap.It's too short..." Read more

"Caddy worked but straps should have been longer . It was hard to hook to top with wench, because there was no space between strap and top of engine." Read more

Customers are dissatisfied with the appearance of the sporting goods. They mention it has a poor design, it's not fancy, and it'll rot in the sun.

"...I suspect this may last a year or so. Pretty cheesy and the straps and buckle will certainly rot in the sun in no time...." Read more

"Motor caddy works as expected. It's not fancy but it does the job." Read more

"...The front should have an adjustable strap. Not a good design ." Read more

" Poor design ..." Read more

Reviews with images

Might work for 60# outboard :-)

• Sort reviews by Top reviews Most recent Top reviews

Top reviews from the United States

There was a problem filtering reviews right now. please try again later..

Top reviews from other countries

• Amazon Newsletter
• About Amazon
• Accessibility
• Sustainability
• Press Center
• Investor Relations
• Amazon Devices
• Amazon Science
• Sell on Amazon
• Sell apps on Amazon
• Supply to Amazon
• Protect & Build Your Brand
• Become an Affiliate
• Become a Delivery Driver
• Start a Package Delivery Business
• Advertise Your Products
• Self-Publish with Us
• Become an Amazon Hub Partner
• › See More Ways to Make Money
• Amazon Visa
• Amazon Store Card
• Amazon Secured Card
• Amazon Business Card
• Shop with Points
• Credit Card Marketplace
• Reload Your Balance
• Amazon Currency Converter
• Your Account
• Your Orders
• Shipping Rates & Policies
• Amazon Prime
• Returns & Replacements
• Manage Your Content and Devices
• Recalls and Product Safety Alerts
• Registry & Gift List

• Conditions of Use
• Privacy Notice
• Consumer Health Data Privacy Disclosure
• Your Ads Privacy Choices

Contact Kato Marine: 7416 Edgewood Road Annapolis, MD 21403 Phone: 410-269-1218 Call us at the number above - or - Use our quick form - or - Email us  Kato Marine has two types of outboard lifts available: Pole Mounted � Our pole mounted arms come in three different lengths and we have mounting clamps to suit our 'Pole Solution' or other manufacturers poles. OutboardLift Outboard motor lifting harness. OutboardLift Products Outboardlift 100. For 2 to 15 hp motors up to 100 lbs Wengler Marine proudly presents the OutboardLift 100  - a simple and strong harness that you can keep on your outboard to provide a convenient lifting point when needed. The OutboardLift improves on our original product with a design that works well with the new streamlined motors as well as flat-bottomed motors. 1.5" webbing - for 2 to 15 hp motors up to 100 lbs. UV resistant polyester webbing with a breaking strength in excess of 2,000 lbs. High strength US-manufactured side release acetal buckles Fits the new streamlined outboard motors as well as flat-bottomed motors Secure harness stays on your outboard to provide a convenient lifting point when needed Manufactured in the USA by Wengler Marine LLC. Patent Pending. OutboardLift 150 For 15 to 30 hp motors to 150 lbs Wengler Marine proudly presents the OutboardLift 150  - a simple and strong harness that you can keep on your outboard to provide a convenient lifting point when needed. The OutboardLift improves on our original product with a design that works well with the new streamlined motors as well as flat-bottomed motors. 2" webbing - for 15 to 30 hp motors to 150 lbs UV resistant polyester webbing with a breaking strength in excess of 4,000 lbs Secure harness can stay on your outboard to provide a convenient lifting point when needed How to use the OutboardLift The OutboardLift  consists of basically three straps, upper, forward and aft straps connected by tri-joints. The tri-joints will be low on the sides of the motor with the handle on the upper strap. Release the buckle on the forward strap, place the OutboardLift on the engine and bring the forward strap around front of engine, then buckle forward strap. Snug up straps after sliding handle along upper strap to top center. Adjust position on motor according to sketches. Keep tri-joints low on streamlined engines so that the forward and aft straps tightly encircle the lower body of the engine. Step by step Please verify you are a human Access to this page has been denied because we believe you are using automation tools to browse the website. This may happen as a result of the following: Javascript is disabled or blocked by an extension (ad blockers for example) Your browser does not support cookies Please make sure that Javascript and cookies are enabled on your browser and that you are not blocking them from loading. Reference ID: 0aac109a-65a9-11ef-a38d-6718d3931a24 Powered by PerimeterX , Inc. 233 IMAGES Precision 23 Swing-Lift outboard motor hoist on Fraser 41 yacht Make an outboard motor hoist Outboard motor lift Davis Motor Caddy Outboard Hoist Harness Make an outboard motor hoist COMMENTS Is there an affordable outboard motor hoist Sep 26, 2005. #5. Outboard Davit. We had a St. Croix davit put on our Hunter 44 for our 8 hp outboard. Lowering the motor is no problem, works great. However, lifting the motor, at almost 80-90 lbs, is tough. I can't get the line to a winch at a good angle so the lines get all tangeld up. Forespar Nova Lift Features: Lift and lower heavy and awkward equipment with ease, including outboard motors, dive equipment, batteries, fuel & water jugs, even pets - the list of uses is endless. Complements all man overboard recovery systems for emergencies. Unique design allows the arm to be installed and ready for use in a matter of seconds. Outboard Boat Motor Lift Crane A stainless steel crane that can lift up to 250 pounds to and from a dinghy. It attaches to the stern rails, folds for storage, and supports solar panels, antennas or anchors. Boat Nova Lift Nova Lift™ is a device that can lift up to 220 lbs using your sailboat winch or its own winch. It is suitable for sailboats and powerboats with high freeboard, and has a stainless steel lower mounting tube for 30" rail height. Motor Lifts Find stainless steel davit systems for outboard motors, radar towers and cargo hoists. Order online or get installation diagrams and guides. Motor Lifts, Trim and Tilt With 15.5" of vertical lift, the Model 45 is perfect for boats where a clamp-on kicker motor will be mounted to a tall transom. Rugged construction features 1/4" thick fabricated aluminum plates, heavy-duty black powder-coat paint, and stainless steel hardware. ... 20HP to 35HP outboard motors, made since 1976. Developed to provide trim and ... I Tested the Game-Changing Outboard Motor Lift Assist: Here's Why Every This means less time spent on preparation and more time enjoying your time on the water. Furthermore, an outboard motor lift assist can also prevent damage to your boat. Trying to manually move the heavy motor can result in scratches or dents on the boat's surface. A lift assist ensures smooth and controlled movements. FORESPAR Motor Mate Lifting Davit The Motor Mate uses a rail mounted ring and a "toe" which mounts to your coaming. Great for the dinghy, but also good for SCUBA tanks, ice, duffel bags, groceries, etc. Lifting capacity 100lb. (the approximate weight of a 15hp outboard motor. Key Features. Anodized aluminum, powder coated for corrosion resistance. 54" Reach; 20" Lift Height. Easy Lift for Outboards Easy Lift for Outboards. Easy-Lift, a British marine company, offers a line of simple-to-use hoists for lowering and raising outboard motors to an inflatable or other dinghy. The simplest of its products consists of a single davit and four-part block and tackle. ... Top Tools for Sailboat Cruising: Must-Have Gear for 2024 For Sale: 1984 Camper ... CMC Power-Lift Hydraulic It also can be purchased with stainless steel motor rails, Model PL-65SS (for V-8 motors 300 HP MAX). Contact your boat manufacturer or local dealer for setback recommendation for your particular boat and also the affects adding a jack plate can have on your boat. High Speed Version available here. Patented Hydraulic Power-Lift® (U.S. Patent ... Make an outboard motor hoist A nylon sling fits round the outboard. It is now a very easy matter to fit the engine to the dinghy, and can even be done single -handed if necessary. Cost of the scrap tubing was £10 and the 1m of studding, nuts and washers cost me £2.60. Bill Martin. We pay at least £30 for each practical project published in PBO. Outboard Motor Lifts Our stainless steel outboard motor lifts offer maximum corrosion resistance and improved performance. (705) 725-1779 (800) 268-0395 Home; About; Products; Services; ... you can rely on us at Stainless Outfitters Inc. to produce the outboard motor lifts that work best for your boat. We can also manufacture your other boating equipment in ... What Is a Boat Motor Hoist? A boat motor hoist, also known as an outboard motor lift or engine hoist, is a device designed to assist in the lifting, lowering and transportation of outboard motors on boats. It is primarily used to remove or install outboard motors from the transom of a boat or lift the motor out of the water when not in use. Boat motor hoists typically ... IMC Easy Lift The easy-to-install lift takes just six seconds to raise and lower. The IMC Easy Lift has been rigorously field-tested by charter fishermen in Alaska on boats from 20 to 35 feet and has met and exceeded all expectations. The IMC Easy Lift is exclusively from Islands Marine Center. Price: $2,695.00. Nova Lift™ Rail Mounted Lifting System Mounting on your stern rail gives added lifted height to your dinghy, and avoids swamping or losing the dinghy when your boat is heeled under sail. Great mechanical advantage: Using a typical 32 size, two speed self tailing winch or similar with a 10" winch handle, Nova Lift™ will lift 200 lbs. and require only 13 lbs. of winch handle ... Amazon.com: Outboard Motor Lift Kojem Jack Plate Adjustable 6'' Set Back JPL4000 Outboard Motor Boat Power Lift Aluminum 150 Maximum Horsepower New Factory Style. 4.5 out of 5 stars. 25. $112.99 $ 112. 99. FREE delivery Aug 29 - Sep 3 . Add to cart-Remove. 3001.1068 Adjustable Heavy Duty Universal Transom Saver for Outboards Motor Up to 150 HP - Adjustable from 28" to 59" The Best Outboard Motor for a Sailboat 4-18 HP for boats between 20-30' (approximately 2,000-10,000lbs) 18-34 HP for boats between 30-40' (10,000lbs or more) There are some things to consider when deciding how much horsepower you need or want. Location and the type of conditions you expect you'll be sailing in is one of the biggest factors. EasyLift Outboard MotorTote Buy at Fawcett Boat. SKU: 9197 Category: Uncategorized. Description; Description. The C-Level Super Heavy-Duty EasyLift Motor Tote is the safest motor lifting harness available Applications: Outboard Motors 30 HP and Larger or 400 lbs Maximum Material: Heavy Duty 2″ Polyester Webbing Handles larger motors, such as today's popular, heavier 4 ... Outboard motor lift Engine Cover. Euro 55,06 - Euro 71,26. Select options. Quick View. Swing-Away Dinghy Stowage. Euro 2.153,80 ( Export 1.780,00 ) Add to cart. With our crane, lifting and lowering the outboard motor is very easy. Perfect in conjunction with the lifting harness it´s a very easy system. Davis Motor Caddy Outboard Hoist Harness Davis Motor Caddy Outboard Hoist Harness. Visit the Davis Instruments Store. 3.4 175 ratings. | Search this page. $4345. The safe and easy way to move an outboard engine. Simple to use; the Motor Caddy is sized to be quickly attached to most outboards from 2 - 15 horsepower. Features straps long enough to fit 4-stroke motors and an added ... Kato Marine has two types of outboard lifts available: Contact Kato Marine: 7416 Edgewood Road Annapolis, MD 21403 Phone: 410-269-1218. Call us at the number above - or - Use our quick form - or - Email us OutboardLift OutboardLift 150. For 15 to 30 hp motors to 150 lbs. Wengler Marine proudly presents the OutboardLift 150 - a simple and strong harness that you can keep on your outboard to provide a convenient lifting point when needed. The OutboardLift improves on our original product with a design that works well with the new streamlined motors as well as ... C-LEVEL Easy Lifts Description. This unit makes easy work of lifting and weighing your boats motor. Polyester webbing is sun water, salt and oil resistant. Harness has a "built-in" handle that needn't be loosened to snap a shackle through to begin lifting the motor. Lifting strap is 1 1/2"W on smaller unit; 2"W on larger. For 15-30hp motors weighing as much as 150lb. catamaran gulet motorboat powerboat riverboat sailboat trimaran yacht